There are many reasons for the excavator to go off the chain. In addition to dirt or stones and other impurities that will cause the excavator to go off the chain, there are als...
Mar 27, 2021
Bucket teeth are an important part of an excavator and also a vulnerable part. It is a combined bucket tooth composed of a tooth seat and a tooth tip, which are connected by a p...
Jan 27, 2021
The hydraulic pump of the water tanker is the power component of the hydraulic system. Its function is to supply pressure oil to the hydraulic system.
Dec 19, 2020
After disassembling the lower bearing, it can only be used for testing. If the roller is found to be scratched or discolored, it must be replaced. When replacing bearings, plung...
Dec 18, 2020
(1) If the cylinder body is inlaid with a copper sleeve, the method of replacing the copper sleeve can be selected for correction.
Dec 17, 2020
The quality of the hydraulic oil in the hydraulic cylinder is very important. A better hydraulic oil contains antiseptics,
Dec 16, 2020
The selection of hydraulic cylinders is usually based on the product's inner diameter, stroke, working pressure and installation form
Dec 15, 2020
1. Choose the hardness of the hydraulic cylinder seal from 92 to 97 degrees. The higher the hydraulic cylinder pressure, the greater the hardness of the seal.
Dec 14, 2020
Because some areas that need to be lubricated are relatively small, the lubricating oil needs to have good penetrating properties when lubricating, so that some relatively dense...
Dec 13, 2020
The transmission sprocket is a gear-shaped mechanical part that meshes with the chain. It appears widely in life, such as bicycles,
Dec 12, 2020
1. Installation requirements ①Select the product model correctly according to the model specification.
Dec 11, 2020
Application of sprocket and chain: gear transmission for chemical plants, textile equipment, food processing,
Dec 10, 2020
