1. When a roller that cannot run due to a malfunction is found, it should be repaired in time
If part of the sprocket or supporting rollers of the excavator cannot continue to operate, continuing to use in this state may cause the rollers to deviate, and may even cause the wear of the rail chain links. Therefore, when encountering such a situation, be sure to repair it immediately, so that other failures can be avoided in time.
2. Avoid excavators traveling on sloping ground or turning suddenly
The excavator repeatedly walks on the sloping ground for a long time and turns suddenly, which will cause the side of the rail link to contact the side of the drive wheel and the guide wheel, resulting in increased wear. Therefore, the excavator should choose straight travel and large turns as much as possible during the operation of the excavator, which can effectively prevent excessive wear.
3. Regular inspections and reinforcement of bolts and nuts can effectively reduce track wear
After the excavator works for a long time, components such as rollers, track shoe bolts, driving wheel bolts, and walking piping bolts are easy to loosen due to vibration. If the equipment continues to operate when the track shoe bolts are loose, there may be a gap between the bolts and the track shoe, which may cause cracks in the track shoe. The generation of the gap may also increase the bolt holes between the crawler belt and the rail link, making it impossible to tighten it, resulting in the consequence that the crawler belt and the rail link must be replaced.
